Tube en acier de 3,2 mm d’épaisseur de paroi.

Réf. 042

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Réf. 455

The Aluminium lattice girder beam is a horizontal member of Ringlock scaffolding. It is used for reinforce and bridging over large spans of 3.05m to 8.52m with a lighter component than the Lattice Girders. The Alum lattice girders have 0.5m in depth.

Réf. 456

La console est utilisée pour créer une plate-forme prolongée à l'extérieur de l'échafaudage et pour ajouter une "saillie" à la construction. Les consoles sont disponibles en 0,39 m, 0,73 m et 1,09 m de longueur.

Réf. 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 549

Steel plans are used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 557

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Réf. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 572

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 573

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Réf. 574

Réf. 582560000

Assemblage de deux tubes d’échafaudage 48,3mm dans un angle quelconque.

Réf. 582680000

Réalisation des ancrages de la tour escalier sur le bâtiment.

Réf. 682004000

Assemblage de deux tubes d’échafaudage 48,3mm dans un angle de 90°.

Réf. 338191500

Le tube d'ancrage au voile est conçu de manière pouvoir être fixé sur un tube d'échafaudage et se raccorde sur une structure porteuse. Il est disponible en 1,00 m et 1,50 m.

Réf. 338191000

Le tube d'ancrage au voile est conçu de manière pouvoir être fixé sur un tube d'échafaudage et se raccorde sur une structure porteuse. Il est disponible en 1,00 m et 1,50 m.

Réf. 328460600

Le vérin de tête est prévu pour le montage sur le dessus d'un échafaudage. Cela concerne notamment les applications dans lesquelles des poutrelles doivent être supportées. En variante, le vérin de tête peut également être employé à la base de l'échafaudage en le retournant.

Réf. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Réf. 319022575

Le planchon à trappe alu 257 cm sert de trappe d'échafaudage légère et extra large avec échelle intégrée. Il n'est disponible qu'en 2,57m.

Réf. 316012575

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.