Art.-No. 589148000

The DokaXlight adapter XP is used in combination with Protective gratings XP or guardrail boards for constructing safety railings on the opposing formwork with a tilt of 15°.

Art.-No. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Package size: 10 pcs.

Art.-No. 582959000

Art.-No. 586646000

Storage and transport device for Protective barriers Z.

Aid for securing and back-staying floor formwork.

Art.-No. 351

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Art.-No. 455

Vertical stacking of a Supporting construction frame "Universal" with Attachable frame F 1.50m for formwork heights from 6.00 m to 8.00 m.

Art.-No. 458

Securing System ladder XS to column formwork.

Art.-No. 460

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overalp on circular scaffolds and perform the angular connection. They are fized with a plastic plug that is provided with them. They are available in two widths: 0.32m and 0.19m and un 3 different lengths: 1.00m, 1.50m and 2.00m.

Art.-No. 468

Connecting plate for high-tensile connections between timber-beam formwork panels at closures.

Art.-No. 469

Das Trennmittel speziell für glatte Schalhaut

Art.-No. 496

Framed element made of aluminium with Xlife sheet for craneless forming of right-angle outside corners, stop-ends and column formwork.

Art.-No. 512

Das universelle Trennmittel für saugende Schalungsoberflächen

Art.-No. 521

Corner element made of aluminium with Xlife sheet for craneless forming of right-angle inside corners.

Art.-No. 524

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 549

Infill planks with 19cm are designed to fill any unwanted gaps between planks or bays providing a continuous working platform. They are available in the sizes of the most common bays: 0.65m, 0,88m, 1.065m, 1.57m, 2.13m, 2.43m, 3.05m.

Art.-No. 556

Steel plans are used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 557

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 559