Art.-No. 586074000

Repositioning Dokaflex, load-bearing towers and Loading platforms Xclimb 60 in combination with the Retaining plate 15.0.

Art.-No. 587533000

High-tensile and aligning inter-panel connection. Inter-panel joins can be pulled tight.

Art.-No. 588640000

Up/down access system permanently mounted on the formwork system.

Art.-No. 588641000

Extends the ladder for the ladder system XS.

Art.-No. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Art.-No. 588669000

Cordons off the platform from the ladder system.

Art.-No. 588673000

Fixing the bottom end of a suspended ladder to the ground.

Art.-No. 586145000

For securing floor props

Art.-No. 582799000

Connections between load-bearing tower and off-level superstructure.

Art.-No. 586258000

Installation of the Doka floor end-shutter clamp.

Art.-No. 586257000

Installation of the Doka floor end-shutter clamp.

Art.-No. 582756000

Back-staying horizontal forces in Steel waling WS10 lying flat on the ground.

Art.-No. 582657500

Connecting the Prop head EB to the Plumbing strut Eurex 60 550.

Art.-No. 582660500

Baseplate with pre-installed Connector Eurex 60.

Art.-No. 588245500

Fixing panel struts to the ground.

Art.-No. 586478000

Making safety barriers on the formwork.

Art.-No. 582351000

Forming downstand beams

Art.-No. 582688000

Coupler WS10 250 is for suspending the stair tower from multi-purpose walings to make up entry and exit flats, for example.

Art.-No. 581977500

Making a positioning point and suspension point for crane-lifted climbing formwork.

Expendable form-tie component for single-sided tying. Length: 115 mm

Art.-No. 116