Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Toote nr 573

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Toote nr 574

Toote nr 335150024

A spring pin EU is used to connect two standards together and must be used during crane lifting. It can be substituted with an M12x60 8.8 hexagonal bolt and nut.

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Toote nr 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Toote nr 549

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Toote nr 559

Toote nr 582680000

Making anchorages to secure the stair tower to the building.

Toote nr 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

The Toe board retaining clamps are used to secure the toeboard from uplift in adverse weather conditions.

Toote nr 476

The wall tie tube is a scaffold tube with pin, designed to keep the standards in the vertical position without buckling.

Toote nr 689

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Toote nr 718

Mid Transom can create a transom at the lift anywhere inside the bay when installed onto a Ledger and can also create openings within the planked bay for Ladder access or to avoid a permanent obstruction.

Toote nr 729

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Toote nr 844

Lattice girders are used to bear heavy loads at large spans or to create a bridging construction within the scaffold. Lattice girders are available in 5.14m, 6.14m, 7.71m. They are 50cm in depth and equipped with Terminal Wedges to connect to the rosettes on the standards. They come without spigot, but a separate spigot can be used.

Toote nr 723

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Toote nr 845

Toote nr 310012004

Adjustable swing gate designed to secure an opening used for access & egress. It allows to cover openings from 0.88 m to 1.35 m.

Toote nr 306110004

The base jack retention prevents the kicker lift to fall off when hoisting the scaffold. It has a terminal wedge and a half coupler allowing to high versatility of the component.

Toote nr 301300014

Rosette clamp horizontal allows a Ledger to be connected anywhere along the length of a bay. Allowing to create an intermediate transom.

Toote nr 301300004

The Rosette clamp allows to add an additional rosette to any point along the vertical (tube Standard). It can accomodate up to six connection points.

Toote nr 305032004

The Spigot adapter with clamp-bolt is used for creating handrails smaller than the bay length.