Art.-No. 328460600

Die Kopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Dies gilt insbesondere für Anwendungen, bei denen Träger abgestützt werden müssen. Alternativ kann die Kopfspindel auch an der Basis des Gerüsts verwendet werden, indem sie umgedreht wird.

One package contains 1 pieces.

Art.-No. 328450600

Die Vierwegkopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Insbesondere für den Einsatz im Traggerüst, wo ein oder mehrere Träger abgestützt werden müssen.

One package contains 1 pieces.

Art.-No. 306030780

Die Gewindefussplatte schwenkbar wird als Startbasis für ein Gerüst verwendet. Sie ist in der Höhe und im Winkel verstellbar, um Unebenheiten auszugleichen, so dass immer ein ebenes Gerüst entsteht.

One package contains 1 pieces.

Art.-No. 306010600

Die Gewindefussplatte wird zur Höhenverstellung des Gerüstes verwendet. Bei der Gewindefussplatte 60cm beträgt die Höhenverstellbarkeit 40 - 450 mm.

One package contains 1 pieces.

Art.-No. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

One package contains 1 pieces.

Art.-No. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

One package contains 1 pieces.

Art.-No. 301791500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

One package contains 1 pieces.

Art.-No. 301791000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

One package contains 1 pieces.

Art.-No. 301790500

Stiele 0,50m ohne Rohrverbinder HS werden als "Vertikale" verwendet, um Lasten auf den Boden zu übertragen. Die Tatsache, dass sie keine Rohrverbinder haben, ermöglicht es, sie für Shoring Anwendungen zu verwenden. Die Stiele sind in verschiedenen Längen erhältlich. Alle 50 cm sind Rosetten eingeschweißt, die es ermöglichen, eine Verbindung zwischen verschiedenen Elementen herzustellen. Um 2 Stiele zu verbinden, muss ein Rohrverbinder verwendet werden. Diese Stiele sind für Hängegerüste zu verwenden.

One package contains 1 pieces.

Art.-No. 301014000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

One package contains 90 pieces.

Art.-No. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

One package contains 1 pieces.

Art.-No. 301012500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

One package contains 1 pieces.

Art.-No. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

One package contains 1 pieces.

Art.-No. 301011500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

One package contains 1 pieces.

Art.-No. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

One package contains 1 pieces.

Art.-No. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

One package contains 1 pieces.

Art.-No. 301280000

Der Hängegerüstverbinder, der paarweise verwendet wird, wird an der unteren Rosette des oberen Stiels und an der oberen Rosette des unteren Stiels befestigt. Dadurch werden die Stiele in Vorbereitung auf hängende oder angehobene Gerüstanwendungen miteinander verbunden.

One package contains 1 pieces.

Art.-No. 306042000

Die Fussplatte 2" wird als Startbasis für ein Gerüst verwendet. Ein Rohr kann direkt auf den Zapfen in der Mitte der Grundplatte aufgesetzt werden.

One package contains 1 pieces.

Art.-No. 335040000

Rohrverbinder für Hängegerüste sind notwendig für die Verbindung von Stielen ohne Rohrverbinder in Hängegerüsten (2 Schraubenachsen pro Verbindung).

One package contains 1 pieces.

Art.-No. 307070100

Die Lenkrolle wurde entwickelt, um einem mittelgroßen bis großen Gerüst Mobilität zu verleihen, indem es das Rollen des Gerüsts auf einer ebenen Fläche ermöglicht.

One package contains 1 pieces.