The stress-resistant formwork beam in solid-web design

High-quality, robust, long-lasting – The Doka H20 top N beam is a durable formwork beam in solid-web design with with a three-ply sheet web that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 002

The durable formwork beam with a solid-web design

High-quality, robust, long-lasting – The Doka H20 top P beam is a durable formwork beam in solid-web design with a web made of special flat-pressed sheet that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Art.-No. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Please note that delivery bottlenecks may occur due to increased demand and delivery times may be extended as a result.

Art.-No. 004

Der bewährte Schalungsträger in Vollwandkonstruktion

Hochwertig, beständig, widerstandsfähig – Der Doka-Träger H20 eco P ist ein formstabiler Vollwandträger mit einem Steg aus Spezial-Flachpressplatte und bewährter Endverstärkung durch Abschrägung der Trägerenden und zusätzlichem Kunststoffniet im Trägergurt. Der Träger kann in Wand- und Deckenschalungssystemen eingesetzt werden.

Bitte beachten Sie, das es aufgrund von erhöhter Nachfrage zu Lieferengpässen kommen kann und sich dadurch die Lieferzeiten verlängern können.

Art.-No. 005

Die leistungsstarke Qualitätsplatte für besondere Anforderungen und viele Einsätze

Die Doka-Schalungsplatte 3-SO 21mm ist eine hochwertige Dreischicht-Massivholzplatte mit beidseitiger Harnstoff-Melaminharzbeschichtung für horizontale und vertikale Schalungseinsätze. Sie bietet erstklassige Betonergebnisse durch ausgesuchte Holzqualität und hervorragende Oberflächenbearbeitung.

Aufgrund erhöhter Nachfrage kann es derzeit zu verlängerten Lieferzeiten kommen.

Art.-No. 006

Die preiswerte Dreischichtplatte für alle Standardanwendungen

Die Schalungsplatte 3S basic 21mm ist eine Dreischicht- Massivholzplatte mit beidseitiger Harnstoff-Melaminharzbeschichtung für den vielfältigen Baustelleneinsatz, die für mehrmaligen Einsatz geeignet ist. Weniger Kosten für Nacharbeiten entstehen aufgrund hoher Maß- und Winkelgenauigkeit.

Aufgrund erhöhter Nachfrage kann es derzeit zu verlängerten Lieferzeiten kommen.

Art.-No. 008

The large-format exposed concrete sheet made of Nordic birch for high exposed concrete requirements and application figures

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-No. 019

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.-No. 026

The lightweight aluminium floor prop with high load capacity

The floor prop Eurex 100 plus is a high-strength construction prop made of aluminium with a load capacity up to 128 kN, type-tested and approved in accordance to with approval Z-8.312-868. The floor prop also impresses with its easy handling thanks to quick-motion adjustment screw jack.

Art.-No. 028

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Self-cleaning threadbar

Art.-No. 032

Self-cleaning threadbar

Art.-No. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-No. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 037

Forming right-angled inside corners.

Art.-No. 038