Cod. art. 333040005

The Ballast weight is installed onto the Ballast weight holder.

Cod. art. 333040015

The Ballast weight holder secures to the Standard to provide overturning when used with Ballast weights.

Tubo di acciaio con parete di 3,2 mm di spessore.

Cod. art. 042

Cod. art. 338191500

Il tubo di ancoraggio a parete è progettato in modo da poter essere fissato a un tubo da ponteggio e collegato a una struttura portante. È disponibile nelle lunghezze di 1,00 m e 1,50 m.

Cod. art. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Cod. art. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Cod. art. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Cod. art. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Cod. art. 315082075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Cod. art. 315072075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Cod. art. 315020890

The Stair tread is designed as the horizontal member connecting to the Stair stringers, providing the steps of the stair system. This fits into a 1.036m (1.04m) Bay width.

Cod. art. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Cod. art. 301790500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Cod. art. 301249605

Plank to plank transoms can be placed between two decks within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Cod. art. 301246405

Plank to plank transoms can be placed between two decks within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Cod. art. 301243205

Plank to plank transoms can be placed between two decks within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Cod. art. 301239605

Ledger to plan transoms can be placed between one deck and one ledger within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Cod. art. 301236405

Ledger to plan transoms can be placed between one deck and one ledger within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Cod. art. 301233205

Ledger to plan transoms can be placed between one deck and one ledger within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Cod. art. 301167715

Lattice girders are used to bear heavy loads at large spans or to create a bridging construction within the scaffold. Lattice girders are available in 5.14m, 6.14m, 7.71m. They are 50cm in depth and equipped with Terminal Wedges to connect to the rosettes on the standards. They come without spigot, but a separate spigot can be used.