Art.-No. 308410735

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Art.-No. 308411093

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Art.-No. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Art.-No. 301280000

The Leg lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.

Art.-No. 301311630

The Guardrail standards are used to create openings for access & egress and the ability to attach a Safety Gate.

Art.-No. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

Art.-No. 335030000

The Toggle pin is designed to lock two Standards together to resist uplift.

Art.-No. 338180023

The wall tie bracket - double, allows a to create a wall tie using a standard tube. The tube connects to the two standards on the bracket. The hole on the bracket allows a bolt to be installed in order to secure the scaffold to the supporting structure.

Art.-No. 307070100

The Castor Wheel is designed to provide mobility to a medium to large size scaffold tower allowing the tower to roll across a flat surface.

Art.-No. 352610000

Plastic rawlplug

Art.-No. 335020000

Pin for securing standard-to-standard connections.

Aid for securing and back-staying floor formwork.

Art.-No. 351

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Art.-No. 455

The Aluminium lattice girder beam is a horizontal member of Ringlock scaffolding. It is used for reinforce and bridging over large spans of 3.05m to 8.52m with a lighter component than the Lattice Girders. The Alum lattice girders have 0.5m in depth.

Art.-No. 456

The Aluminum ladder is designed to attach to Ringlock scaffolding using the Ladder Hook Clamp/Clip. The Ladder feet and rungs are offset to allow for safe footing during access and egress. It is available in 4 different sizes: 2.4m, 3.6m, 4.8m and 6.0 m.

Art.-No. 457

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overlap on circular scaffolds and perform the angular connection. They are fitted with a plastic plug that is supplied with them.

Art.-No. 468

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Infill planks with 19cm are designed to fill any unwanted gaps between planks or bays providing a continuous working platform. They are available in the sizes of the most common bays: 0.65m, 0,88m, 1.065m, 1.57m, 2.13m, 2.43m, 3.05m.

Art.-No. 556

Steel plans are used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 557