Steel tube with wall thickness of 3.2 mm.

Art.-nr. 042

Art.-nr. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

Art.-nr. 682004000

For connecting two Scaffold tubes 48.3mm at an angle of 90°.

Art.-nr. 582204000

Securing the Staxo 40 coupler.

Art.-nr. 338191500

The Wall tie is designed to attach to a Scaffold tube and butt to a supporting structure. It is available in 1.00m and 1.50m.

Art.-nr. 338191000

The Wall tie is designed to attach to a Scaffold tube and butt to a supporting structure. It is available in 1.00m and 1.50m.

Art.-nr. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

Art.-nr. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Art.-nr. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Art.-nr. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-nr. 316052575

Das Innengeländer verlängert wird zur Sicherung der Innenseite eines Treppenturms am Ausgang verwendet und bietet ein Geländer am Ausstiegsbereich. Erhältlich für Treppenlängen von 2,57 m und 3,07 m.

Art.-nr. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.-nr. 306030780

Die Gewindefussplatte schwenkbar wird als Startbasis für ein Gerüst verwendet. Sie ist in der Höhe und im Winkel verstellbar, um Unebenheiten auszugleichen, so dass immer ein ebenes Gerüst entsteht.

Art.-nr. 306010600

Die Gewindefussplatte wird zur Höhenverstellung des Gerüstes verwendet. Bei der Gewindefussplatte 60cm beträgt die Höhenverstellbarkeit 40 - 450 mm.

Art.-nr. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-nr. 301792500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-nr. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-nr. 301791500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-nr. 301791000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-nr. 301790500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds