Verstrebungen sind unerlässlich, um die vertikale Steifigkeit des Gerüsts zu erhöhen! Zur Stabilisierung der äußeren Gerüstebene, parallel und senkrecht zur Fassade, werden Vertikalstreben verwendet. Vertikalstreben werden mindestens in jedem 5. Feld eines jeden Gerüstes und in jedem Endfeld senkrecht zur Fassade angebracht. Die Diagonalen sind für Höhen von 1,00 m, 1,50 m und 2,0 m sowie für Feldlängen von 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m und 3,07 m erhältlich.

Art.nr. 574

Art.nr. 636

The wall tie tube is a scaffold tube with pin, designed to keep the standards in the vertical position without buckling.

Art.nr. 689

The Gap Filler Plates are designed to fill any unwanted gaps between planks or bays creating continuous platforms and can easily be installed in the same method as the infill planks and can be secured to the main planks.

Art.nr. 690

The Plan Braces are used for lateral bracing between the node points on the Ringlock Standards. The Plan Braces come in various sizes to suit the bay range.

Art.nr. 691

The Plan Braces are used for lateral bracing between the node points on the Ringlock Standards. The Plan Braces come in various sizes to suit the bay range.

Art.nr. 692

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.nr. 718

The inner guardrail 1m is used to shield the inner side of a 1m staircase.

Art.nr. 719

The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch.

Art.nr. 722

Art.nr. 319022075

The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch.

Art.nr. 319023075

The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch and a ladder.

Art.nr. 308130755

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overlap on circular scaffolds and perform the angular connection. They are fitted with a plastic plug that is supplied with them.

Art.nr. 308131255

Art.nr. 308131755

Art.nr. 308140755

Art.nr. 308141255

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overlap on circular scaffolds and perform the angular connection. They are fitted with a plastic plug that is supplied with them.

Art.nr. 308141755

Art.nr. 310067004

The Access barriers are designed to be used as a guardrail at the top and bottom of the Aluminum 4 leg Platform Stairs and can also be used to provide barriers around gaps in platforms for ladder access.

Art.nr. 308132505

The Gap Filler Plank is designed to span small openings in the Ringlock platform or between bays and can easily be installed over a gap and secured to the Steel Plank to prevent further movement. Available in two different widths 320mm and 190mm.

Art.nr. 306020605

The Base jack solid 60cm is used as a starting base for a scaffold. It is adjustable in height to allow for compensation on uneven surfaces so that a level scaffold is always attainable.