Shop Doka.com myDoka
0
  1. Page d'accueil
  2. Components & Accessories
  3. Formwork beams
  4. Beam XT20
  5. Doka beam XT20
Vous pouvez afficher les prix de vos produits après vous être connecté(e) ou inscrit(e).

Doka beam XT20

Doka beam XT20

NEW - Doka beam XT20 with extra load capacity!

The Doka beam XT20 impresses with its extra load-bearing capacity. Installed in wall and floor formwork systems, its additional strength means less material consumption. This saves time and reduces costs on the construction site.

Plus d'informations
Variantes:
Variantes:
  • Doka beam XT20 1.80m
  • Doka beam XT20 2.45m
  • Doka beam XT20 2.65m
  • Doka beam XT20 2.90m
  • Doka beam XT20 3.30m
  • Doka beam XT20 3.60m
  • Doka beam XT20 3.90m
  • Doka beam XT20 4.50m
  • Doka beam XT20 4.90m
  • Doka beam XT20 5.35m
  • Doka beam XT20 5.90m
Matériel neuf
État : Matériel neuf
Quantité

Correspond XX.YY pcs

Matériel d'occasion
État : Matériel d'occasion
Quantité

Correspond XX.YY pcs

Le matériel d'occasion de Doka a fait l'objet d'un entretien par les spécialistes du service de reconditionnement et remplissent les normes de qualité élevées de Doka.

Autres produits

Autres informations

Informations du produit

NEW - Doka beam XT20 with extra load capacity!

The Doka beam XT20 impresses with its extra load-bearing capacity. Installed in wall and floor formwork systems, its additional strength means less material consumption. This saves time and reduces costs on the construction site.

With its low weight of just 5 kg/lin. m, the XT20 beam ensures ergonomic working. The proven height of 20 cm is ideal for use with existing accessories. The top beam end reinforcement offers reliable protection against splintering and moisture.

Product features:

  • Extra load-bearing timber formwork beam in the proven construction height of 20 cm
  • Can be used in beam-floor and beam-wall formwork systems
  • Top-beam-end reinforcement as reliable protection against splintering and moisture
  • Support bar made of high-quality plywood with grey bar coating
  • Beams marked in 50-cm increment-grid
  • 2 system holes at each beam end
  • Notch for chalk line
  • Labelling on belt width and bar; Optional: Customising possible
  • Officially approved by the DIBt (Approval: Z-9.01-920)

Technical Data:

  • Moment(M): 7,0 kNm
  • Shear force (Q): 15,0 kN (16,5 kN)*
  • Rigidity (EI): 585 kNm²
  • Weight: 5,0 kg/lin. m

* According to approval Z-9.1-920, the permissible shear force may be assumed to be 16.5 kN if the permissible support force of 30 kN is complied with.

Applicable aux systèmes suivants

Vers le haut