Art.-No. 588466000

Support plate for Hexagon nut 15.0 in cramped spaces.

One package contains 1 pieces.

Art.-No. 589219000

For sealing the form-tie points in the concrete.

One package contains 500 pieces.

Art.-No. 589235000

Detaching the formwork from the hardened concrete.

One package contains 1 pieces.

Art.-No. 589282000

Accessory for making form-tie points in fair-faced concrete quality.

One package contains 1 pieces.

Art.-No. 589285000

Secures the stacked panels (without integral form-tie nuts) to prevent slippage.

One package contains 100 pieces.

Art.-No. 589308000

For watertight and fire-resistant closure of the form-tie points in the concrete.

One package contains 1 pieces.

Art.-No. 589216500

Mounts on the holding formwork and, in combination with the Framax Xlife plus form tie, enables the form-tie point to be operated from one side.

One package contains 1 pieces.

Art.-No. 580035000

Plate for making inside corners with integrated closure function.

One package contains 1 pieces.

Art.-No. 580074000

High-tensile and aligning inter-panel connection. Inter-panel joins can be pulled tight.

One package contains 1 pieces.

Art.-No. 580078000

Connecting plate for making inside corners.

One package contains 1 pieces.

Art.-No. 580110000

For securing the Doka beams at the ends of the waling.

One package contains 1 pieces.

Art.-No. 580120000

For securing Doka beams anywhere on the waling or steel profile, for example the I-beam.

One package contains 1 pieces.

Art.-No. 580135000

For securing Doka beams H20 anywhere on the multi-purpose waling.

One package contains 1 pieces.

Art.-No. 580137000

For securing Doka beams or squared timbers anywhere on the waling or steel profile, for example the IPB. Also suitable for post-assembly securing.

One package contains 1 pieces.

Art.-No. 580204000

Securing connecting pins, for example.

One package contains 1 pieces.

Art.-No. 580218000

For vertical plumbing of beam formwork panels set longside vertical.

One package contains 1 pieces.

Art.-No. 580262000

Inside corner plate, for example for shaft formwork. Enables the entire shaft inside corner to be struck and repositioned in one piece.

One package contains 1 pieces.

Art.-No. 580267000

For making rigid corner plates at any angle. After the formwork has been plumbed, two Half splice plates are welded at the predefined angle.

One package contains 1 pieces.

Art.-No. 580381000

Nailed connection for intersecting Doka beams or squared timbers.

One package contains 1 pieces.

Art.-No. 580449000

Suspension head for constructing project-specific working and protection platforms.

One package contains 1 pieces.