Réf. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

Réf. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Réf. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Réf. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Réf. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Réf. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Réf. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Réf. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Réf. 399020000

The Scaffold storage rack is designed for storage of larger items such as Standards, Ledgers, Steel Plank, etc.

Réf. 308410735

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Réf. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

Réf. 301280000

The Leg lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard. This joins the standards together in preparation for suspended or lifted scaffold applications.

Réf. 301311630

The Guardrail standards are used to create openings for access & egress and the ability to attach a Safety Gate.

Réf. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

Réf. 335030000

The Toggle pin is designed to lock two Standards together to resist uplift.

Réf. 399010000

The Scaffold cage insert is designed to fit into the storage rack, to create the basket for storage of smaller scaffold items such as clamps and accessories.

Réf. 399200010

Storage rack with integrated mesh inserts.

Réf. 335040000

Spigots for hanging scaffolds are necessary for connecting standards without spigots in suspended scaffolds (2 bolt axis per connection).

Réf. 307070100

The Castor Wheel is designed to provide mobility to a medium to large size scaffold tower allowing the tower to roll across a flat surface.

Réf. 335020000

Pin for securing standard-to-standard connections.