Extension of the Xsafe plus platform waling 1.50m with vertically stacked Framax panels set longside horizontal.

Cod. art. 073

Cod. art. 580441000

Bracket for making a folding platform.

Cod. art. 580485000

Closure between 2 folding platforms and corner solution.

Cod. art. 580413000

Pre-assembled scaffold platform for use as working or protection platform at an inside corner.

Cod. art. 580424000

Pre-assembled scaffold platform for use as working or protection platform at an outside corner.

Cod. art. 586415000

For bracing vertically stacked Framax panels set longside vertical and for securing the Xsafe plus platform at the inter-panel joint.

Steel tube with wall thickness of 3.2 mm.

Cod. art. 042

Telescopic beam for making shaft platforms.

Cod. art. 110

For making a formwork-side railing on the Xsafe plus platform.

Cod. art. 113

Cod. art. 580470000

Erecting safety railings at exposed outer edges.

Cod. art. 581120000

Lost form-tie component for single-sided formwork tying.

Cod. art. 581448000

Tightening and loosening cone screws.

Cod. art. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Cod. art. 581890000

Expendable form-tie component for single-sided tying.

Cod. art. 581891000

Closing the opening left in the concrete by the bridge edge beam support.

Una confezione è costituita da 100 pezzo

Cod. art. 581896000

Expendable form-tie component for single-sided tying.

Cod. art. 581966000

Connector with captive support plate used with tie rods.

Cod. art. 581984000

Expendable form-tie component for single-sided tying.

Cod. art. 584384000

Fall protection on the structure.

Cod. art. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Una confezione è costituita da 100 pezzo