Art.-No. 588247500

Basic strut for connecting to different formwork systems with heights up to approx. 4 m.

Art.-No. 588250500

Basic strut for connecting to different formwork systems with heights up to approx. 6 m.

Art.-No. 582657500

Connecting the Prop head EB to the Plumbing strut Eurex 60 550.

Art.-No. 582660500

Baseplate with pre-installed Connector Eurex 60.

Art.-No. 588245500

Fixing panel struts to the ground.

Art.-No. 582239000

Levelling on sloping support surfaces.

Art.-No. 582351000

Forming downstand beams

Attaching a toeboard to the Handrail post XP 1.20m.

Art.-No. 279

Height-adjustable connections between load-bearing tower and superstructure in combination with Split nut B for primary beams (e.g. multi-purpose walings, steel girders).

Art.-No. 297

Tip-up protector for Doka formwork beams during sheeting operations.

Art.-No. 303

Making assembly flats, service walkways and bracings in combination with assembly planking.

Art.-No. 322

Connecting Scaffold tubes 48.3mm at any angle to the vertical tubes of load-bearing tower frames.

Art.-No. 341

Art.-No. 338191500

The Wall tie is designed to attach to a Scaffold tube and butt to a supporting structure. It is available in 1.00m and 1.50m.

Art.-No. 338191000

The Wall tie is designed to attach to a Scaffold tube and butt to a supporting structure. It is available in 1.00m and 1.50m.

Art.-No. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

Art.-No. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Art.-No. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Art.-No. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-No. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-No. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.