Timber-and-plastic composite formwork beam with Top beam-end reinforcement and plastic sheet on the broadside of the flange. (Approval n° Z-9.1-773)

Art.-No. 001

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Art.-No. 006

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites.

Art.-No. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-No. 019

DokaPly Birch is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

Doka floor props Eurex 20 top are adjustable telescopic steel props that conform to EN 1065.
They are designed for use as vertical props for temporary structures.

Art.-No. 024

Doka floor props Eurex top are extendable floor props made of steel and are compliant with EN 1065.
They are designed for use as vertical props for temporary structures.

Art.-No. 025

Doka floor props Eurex eco are adjustable telescopic steel props that conform to EN 1065.
They are designed for use as vertical props for temporary structures.

Art.-No. 026

Die aluleichte Deckenstütze mit hoher Tragfähigkeit

Die Deckenstütze Eurex 100 plus ist eine hoch belastbare Baustütze aus Aluminium mit einer Tragkraft von bis zu 128 kN, die nach allg. bauaufsichtlicher Zulassung Z-8.312-868 typengeprüft und zugelassen ist. Zusätzlich überzeugt die Deckenstütze mit ihrer einfachen Handhabung durch die Schnellverstellung über Spindeln.

Art.-No. 028

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Self-cleaning threadbar

Art.-No. 032

Self-cleaning threadbar

Art.-No. 033

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-No. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 037

Forming right-angled inside corners.

Art.-No. 038