Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-No. 003

Art.-No. 580914000

Pressure sprayer for Doka release agents.

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 588153400

Connector for high-tensile connections between framed panels.

Art.-No. 588168000

Infill connection to resist tensile forces.

Art.-No. 588433000

Connector for high-tensile connections between panels.

Art.-No. 588436000

High-tensile, rigid, inter-panel and panel-to-infill joins.

Art.-No. 588631000

Attachment for plumbing accessories.

Art.-No. 586155500

For securing floor props

Expendable form-tie component for single-sided tying. Length: 115 mm

Art.-No. 116

Art.-No. 586298000

Set-up aid for floor props.

For supporting and aligning wall formwork.

Art.-No. 239

Release agent specially for smooth formwork surfaces.

Art.-No. 496

Release agent specially for absorbent formwork surfaces.

Art.-No. 521

Telescopic steel prop.

Art.-No. 682

Art.-No. 720073047

<p>Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.</p>

Art.-No. 720075810

Art.-No. 720075811

Art.-No. 720048942