Cod. art. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

Cod. art. 335040000

Spigots for hanging scaffolds are necessary for connecting standards without spigots in suspended scaffolds (2 bolt axis per connection).

Cod. art. 307070100

The Castor Wheel is designed to provide mobility to a medium to large size scaffold tower allowing the tower to roll across a flat surface.

Cod. art. 589149000

Integrable inter-panel connector for DokaXlight panels. Not a substitute for the standard Frami clamp.

Cod. art. 589148000

The DokaXlight adapter XP is used in combination with Protective gratings XP or guardrail boards for constructing safety railings on the opposing formwork with a tilt of 15°.

Cod. art. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Cod. art. 586643000

Grating for safety barriers on the structure.

Cod. art. 586642000

Grating for safety barriers on the structure.

Cod. art. 586646000

Storage and transport device for Protective barriers Z.

Aid for securing and back-staying floor formwork.

Cod. art. 351

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Cod. art. 455

Vertical stacking of a Supporting construction frame "Universal" with Attachable frame F 1.50m for formwork heights from 6.00 m to 8.00 m.

Cod. art. 458

Installing form-tie components at an angle of 45 °.

Cod. art. 459

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overalp on circular scaffolds and perform the angular connection. They are fized with a plastic plug that is provided with them. They are available in two widths: 0.32m and 0.19m and un 3 different lengths: 1.00m, 1.50m and 2.00m.

Cod. art. 468

Plywood sheet made of unsanded chinese poplar veneers. Both sides are coated with 160 g/m² Black phenolic-resin film. Bonding will pass a 24 h boiling test.

Cod. art. 485

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Cod. art. 486

Release agent specially for smooth formwork surfaces.

Cod. art. 496

Framed element made of aluminium with Xlife sheet for craneless forming of right-angle outside corners, stop-ends and column formwork.

Cod. art. 512

Release agent specially for absorbent formwork surfaces.

Cod. art. 521

Corner element made of aluminium with Xlife sheet for craneless forming of right-angle inside corners.

Cod. art. 524