Réf. 338191000

The Wall tie is designed to attach to a Scaffold tube and butt to a supporting structure. It is available in 1.00m and 1.50m.

Réf. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

Réf. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Réf. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Réf. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Réf. 306030780

Le vérin de base pivotant est utilisé comme base de départ pour un échafaudage. Il est réglable en hauteur et en angle pour compenser les irrégularités de façon à avoir toujours un échafaudage plan.

Réf. 306010600

Le vérin de pied est utilisé pour régler la hauteur de l'échafaudage. Avec un vérin de base 60cm, le réglage en hauteur est de 40 - 450 mm.

Réf. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301791500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301791000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Réf. 301249605

Plank to plank transoms can be placed between two decks within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Réf. 301246405

Plank to plank transoms can be placed between two decks within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Réf. 301243205

Des traverses entre planchons peuvent être placées entre deux planchons au sein d'une travée, pour supporter des planchons, par exemple pour créer des passages d'échelles ou créer des ouvertures. Elles sont disponibles dans des largeurs qui correspondent à 1, 2 et 3 panneaux.

Réf. 301239605

Ledger to plan transoms can be placed between one deck and one ledger within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Réf. 301236405

Ledger to plan transoms can be placed between one deck and one ledger within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Réf. 301233205

Des traverses moise-planchon peuvent être placées entre un planchon et une moise au sein d'une travée, pour supporter des planchons, par exemple pour créer des passages d'échelles ou créer des ouvertures. Elles sont disponibles dans des largeurs qui correspondent à 1, 2 et 3 panneaux.

Réf. 301167715

Lattice girders are used to bear heavy loads at large spans or to create a bridging construction within the scaffold. Lattice girders are available in 5.14m, 6.14m, 7.71m. They are 50cm in depth and equipped with Terminal Wedges to connect to the rosettes on the standards. They come without spigot, but a separate spigot can be used.

Un pack comprend 20 pièces.

Réf. 301166145

Lattice girders are used to bear heavy loads at large spans or to create a bridging construction within the scaffold. Lattice girders are available in 5.14m, 6.14m, 7.71m. They are 50cm in depth and equipped with Terminal Wedges to connect to the rosettes on the standards. They come without spigot, but a separate spigot can be used.

Un pack comprend 20 pièces.

Réf. 301165145

Les poutres en treillis sont employées pour supporter des charges lourdes avec de grandes portées et pour créer une construction de pontage à l'intérieur de l'échafaudage. Les poutres en treillis sont disponibles en longueurs de 5,14 m, 6,14 m et 7,71 m. Elles ont une profondeur de 50 cm et sont dotées de cales d'extrémité pour les connecter aux disques perforés des tubes d'étais. Elles sont livrées sans connexion de tube mais une connexion de tube séparée peut être utilisée.

Un pack comprend 20 pièces.