Connecting plate for high-tensile connections between timber-beam formwork panels at closures.

Art.-No. 469

Release agent specially for smooth formwork surfaces.

Art.-No. 496

Release agent specially for absorbent formwork surfaces.

Art.-No. 521

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Art.-No. 533

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 549

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-No. 561

Enables timber-beam formwork to be used together with the Framax stripping corner.

Art.-No. 571

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 574

Forming acute-angle and obtuse-angle inside corners.

Art.-No. 619

The Doka Floor prop Eurex 20 basic impresses with a weight advantage of up to 4 kg compared to conventional floor props of class B/D according to EN 1065, and at a constant minimum load capacity of 20 kN for any extension length. The special thread geometry also allows the adjusting nut to be released smoothly even under high load.

Art.-No. 682

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 844

Art.-No. 185303000

Plywood sheet made of Vietnamese acacia with film coating on both sides.

Art.-No. 185241500

Plywood sheet made of Chinese poplar veneer with composed deck Veneers. Both sides are coated with 120 g/m² brown phenolic-resin film. Bonding is exterior and will pass a 24 h boiling test.

Diagonal anchor for anchoring the Supporting construction frame "Variable".

Art.-No. 200

Art.-No. 754010284

Smooth double-sided film-faced plywood (F/F) exhibits excellent mechanical properties for demanding construction applications. It is primarily utilized as formwork panel for fair-face concrete in monolithic and bridge structures, or as material for casting molds in precast reinforced concrete production.

Art.-No. 581835000

Installing form-tie components at an angle of 45 °.

Art.-No. 581427000

Installing form-tie components at an angle of 45 °.

Art.-No. 581990000

Prevents adhesion between concrete and cone.

Art.-No. 580498000

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.