Art.-nr. 581995000

Prevents concrete from penetrating inside the jacket tube.

Art.-nr. 582528000

Connection resistant to tensile and compressive forces to secure profiles telescoped into each other.

Art.-nr. 581839000

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Art.-nr. 588674000

Accessory for cleaning formwork sheets.

Art.-nr. 586294000

Set-up aid for floor props.

Art.-nr. 581860000

Is pushed onto the Plastic tube 22.

Art.-nr. 506501160

Stacking protector on the underside of Dokadek panels

For protecting the formwork sheeting and the frame profiles when panels are stacked. 8 are needed for each Dokadek panel 1.22x2.44m or 0.81x2.44m and 4 are needed for each Dokadek panel 1.22x1.22m or 0.81x2.44m.

Expendable form-tie component for single-sided tying.

Art.-nr. 116

Art.-nr. 020441

Art.-nr. 508302100

Art.-nr. 581862000

Sealing form-tie points to meet fair-faced concrete requirements.

Art.-nr. 582958000

Extension of the Supporting construction frame AL 3.00m for a pouring height up to 3.30m.

Cost-effective and lightweight, the Doka beam H20 basic P is a solid-web beam with its low weight and proven end reinforcement in the form of bevelled beam ends. (EN 13377-compliant).

Art.-nr. 162

Diagonal anchor for anchoring the Supporting construction frame "Variable".

Art.-nr. 199

Prevents concrete from escaping at the form-tie point.

Art.-nr. 212

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Art.-nr. 213

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-nr. 228

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-nr. 229

Closing holes in the concrete.

Art.-nr. 241

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-nr. 278