Grating for safety barriers on the formwork or on the structure.

Art.-nr. 043

Post for safety barriers on the formwork or on the structure.

Art.-nr. 089

Art.-nr. 586456000

Making safety barriers on the structure or on the formwork.

Art.-nr. 586457000

Securing the Handrail post XP to concrete slabs.

Art.-nr. 586469000

Mount for making safety barriers on parapets.

Art.-nr. 586475000

Making tiltable safety barriers at the opposing formwork.

Art.-nr. 586481000

For making slab stop-ends.

Art.-nr. 586484000

Erecting safety barriers on sheet-pile walls.

For supporting and setting up wall formwork and concrete precastings.

Art.-nr. 146

Art.-nr. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

Art.-nr. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

Art.-nr. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

Art.-nr. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-nr. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-nr. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.-nr. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Art.-nr. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.-nr. 399020000

The Scaffold storage rack is designed for storage of larger items such as Standards, Ledgers, Steel Plank, etc.

Art.-nr. 308410735

The Angular deck is used for circular scaffold applications to close the gap between trapezoidal scaffold bays in order to reduce the need for lapping Wood Planks. Up to 45-degrees of adjustment can be made between bays. It is available at widths of 73cm (2 steel plank wide) and an extension to 1.09m (3 steel plank) wide scaffold.

Art.-nr. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.