Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Réf. 003

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Réf. 002

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Note: For fast shipping, currently only available in the sizes 2,9m 3,9m and 4,9m

Réf. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Réf. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Réf. 022

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Réf. 025

Doka-Deckenstützen Eurex 20 eco sind Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen. Sie sind für den Einsatz in Doka-Deckensystemen konzipiert. 

Réf. 026

Self-cleaning threadbar

Réf. 029

Grating for safety barriers on the formwork or on the structure.

Réf. 043

Bracing gangforms, infills and corners and forming stop-ends.

Réf. 075

Bracing load-bearing tower frames.

Réf. 076

Infilling along edges and around columns.

Réf. 079

For forming large floor areas.

Réf. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Réf. 083

Post for safety barriers on the formwork or on the structure.

Réf. 089

Making assembly platforms with integral manhole.

Réf. 091

Basic frame with integral ladder and captive connectors for vertical stacking.

Réf. 105