Threaded bar for connections combined with threaded nut.

Item no. 311

Expendable form-tie component for two-sided formwork tying.

Item no. 320

Bearing plate for connectors with form-tie angles up to 15 °.

Item no. 349

Item no. 741022137

Film faced panel for concrete shuttering and moderate reuse requirements. Provides a glossy, smooth finish, with some woodgrain transfer.  

A package consists of 60 pieces.

Item no. 741022138

Film faced panel for concrete shuttering and moderate reuse requirements. Provides a glossy, smooth finish, with some woodgrain transfer. Both sides of the panel are coated with 130g/m² phenolic film.

A package consists of 50 pieces.

Item no. 741022154

Film faced panel for concrete shuttering and low reuse requirements. Provides a glossy, smooth finish, with some woodgrain transfer. 

A package consists of 50 pieces.

Item no. 741022153

Phenolic film faced panel for concrete shuttering and low reuse requirements.   Provides a glossy, smooth finish, with some woodgrain transfer. Both sides of the panel are coated with 130g/m² phenolic film.

A package consists of 60 pieces.

Installing form-tie components at an angle of 45 °.

Item no. 459

Item no. 741022223

MDO faced panel for concrete shuttering and moderate reuse requirements. Provides a matte finish, with minimal to no woodgrain transfer. The back is sealed with 130g/m² phenolic film.

A package consists of 60 pieces.

Item no. 741022232

HDO faced panel for concrete shuttering and higher than average reuse requirements.   Provides a smooth, glossy finish, with minimal to no woodgrain transfer. The back is sealed with 130g/m² phenolic film

A package consists of 47 pieces.

Item no. 741022233

Provides a smooth, glossy finish, with minimal to no woodgrain transfer. The back is sealed with 130g/m² phenolic film.

A package consists of 56 pieces.

Item no. 741022236

MDO faced panel for concrete shuttering and moderate reuse requirements. Provides a matte finish, with minimal to no woodgrain transfer. The back is sealed with 130g/m² phenolic film

A package consists of 50 pieces.

Item no. 741022239

Coated on the face and back with the same HDO overlay, this panel is for concrete shuttering and higher than average reuse requirements.   Provides a smooth, glossy finish, with minimal to no woodgrain transfer on both faces 

A package consists of 47 pieces.

Item no. 741022240

Coated on the face and back with the same HDO overlay, this panel is for concrete shuttering and higher than average reuse requirements. Provides a smooth, glossy finish, with minimal to no woodgrain transfer on both faces

A package consists of 56 pieces.

Item no. 741022254

Coated on the face and back with the same HDO overlay, this panel is for concrete shuttering and higher than average reuse requirements.   Provides a smooth, glossy finish, with minimal to no woodgrain transfer on both faces 

A package consists of 47 pieces.

Item no. 741022295

The tie rod system 15.0 makes it possible to tie panels in narrow or confined spaces
Permitted capacity allowing a 2:1 factor of safety against failure: 22,000 Lbs (98kN)

Item no. 741022297

The tie rod system 15.0 makes it possible to tie panels in narrow or confined spaces
Permitted capacity allowing a 2:1 factor of safety against failure: 22,000 Lbs (98kN)

Item no. 741022299

The tie rod system 15.0 makes it possible to tie panels in narrow or confined spaces
Permitted capacity allowing a 2:1 factor of safety against failure: 22,000 Lbs (98kN)

Item no. 741022130

High quality birch panel, coated on both faces with 220g/m² phenolic film. This panel is intended for high reuse applications and will provide a smooth finish with some woodgrain transfer.

A package consists of 40 pieces.

Item no. 741022288

For framing wall thicknesses of 6" to 30"
Permitted capacity allowing 2:1 factor of safety against failure: 18,000 Lbs (80kN)