N.º art. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

N.º art. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

N.º art. 301270000

The base collar with a single rosette is placed on the base jack and forms an easy base for the rest of the scaffold. The base collar makes the alignment of a modular structure easier.

N.º art. 328450600

The 4 way screw jack is designed to be installed at the top of a scaffold. Particularly for shoring applications where one more beams are required to be supported.

N.º art. 328460600

The U head is designed to be installed at the top of a scaffold. Particularly for Shoring applications where beams are required to be supported. Alternatively the U head can be used at the base of the scaffold by turning it upside down.

N.º art. 319022575

The Alum ladder hatch deck 257cm acts as a lightweight, extra wide scaffold acess deck which incorporates a Ladder. It is available only with 2.57m.

N.º art. 319023075

The Ladder Hatch Plank acts as a lightweight, extra wide Scaffold Plank which incorporates a hatch and a ladder.

N.º art. 316052575

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

N.º art. 316080005

The inner guardrail is used to shield the inner side of a staircase tower. The inner guardrail suits for both stair lengths of 2.57m, 3.07m.

N.º art. 582560000

For connecting two Scaffold tubes 48.3mm at any angle.

N.º art. 307070100

La roue de guidage a été développée pour conférer de la mobilité à un échafaudage de moyenne à grande taille en permettant de faire rouler l'échafaudage sur une surface plane.

N.º art. 310067004

The Access barriers are designed to be used as a guardrail at the top and bottom of the Aluminum 4 leg Platform Stairs and can also be used to provide barriers around gaps in platforms for ladder access.

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

N.º art. 455

Steel tube with wall thickness of 3.2 mm.

N.º art. 042

Les entretoises sont indispensables pour augmenter la rigidité verticale de l’échafaudage ! Des étançons verticaux sont utilisés pour stabiliser le plan extérieur de l'échafaudage, parallèlement et verticalement à la façade. Les étançons verticaux doivent être placés verticalement à la façade au moins dans chaque 5ème travée d'un échafaudage et dans chaque travée d'extrémité. Les diagonales sont disponibles pour des hauteurs de 1,00 m, 1,50 m et 2,0 m ainsi que pour des longueurs de travée de 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m et 3,07 m.

N.º art. 572

Les planchons acier sont employés pour créer une plate-forme de travail dans un échafaudage. Ils sont placés directement sur les moises et sécurisés avec la sécurité anti-soulèvement intégrée. Les planchons acier sont disponibles en deux largeurs 0,19 m et 0,32 m et dans les longueurs 0,73 m, 1,09 m, 1,40 m, 1,57 m, 2,07 m, 2,57 m et 3,07 m.

N.º art. 557

N.º art. 335040000

Spigots for hanging scaffolds are necessary for connecting standards without spigots in suspended scaffolds (2 bolt axis per connection).

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

N.º art. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

N.º art. 573

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

N.º art. 574