Der Verbundschalungstäger I tec 20 ist ein Vollwandträger gemäß Zulassung des DIBt mit speziellem Aufbau und innovativer Endverstärkung aus Polyurethan für geringeren Materialeinsatz und verlängerte Lebensdauer.

Art.nr. 001

EN 1065-compliant telescopic construction prop, made of steel.

Art.nr. 024

EN 1065-compliant telescopic construction prop, made of steel.

Art.nr. 025

EN 1065-compliant telescopic construction prop, made of steel.

Art.nr. 026

Self-cleaning threadbar

Art.nr. 029

Self-cleaning threadbar

Art.nr. 030

Grating for safety barriers on the formwork or on the structure.

Art.nr. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.nr. 075

Bracing load-bearing tower frames.

Art.nr. 076

Post for safety barriers on the formwork or on the structure.

Art.nr. 089

Art.nr. 580470000

Erecting safety railings at exposed outer edges.

Art.nr. 581966000

Connector with captive support plate used with tie rods.

Art.nr. 584384000

Fall protection on the structure.

Art.nr. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

En pakning består av 100 stykk.

Art.nr. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Art.nr. 586179000

Securing intermediate props to prevent toppling.

Art.nr. 586232000

Making a side stop-end on the slab formwork.

Art.nr. 586239000

Making a slab stop-end.

Art.nr. 588141000

For tying panels set longside horizontal (foundation formwork). The upper form-tie can then be placed above the top edge of the formwork.

Art.nr. 588143000

Forming stop-ends.