Art.-No. 586155500

For securing floor props

Art.-No. 586271000

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 580579000

Releasing the positioning cones.

Art.-No. 581699000

Positioning cone for suspension cone with larger bearing surface.

Art.-No. 581971000

Suspending Folding platforms A, B and K.

Art.-No. 581995000

Prevents concrete from penetrating inside the jacket tube.

One package contains 500 pieces.

Art.-No. 581839000

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Art.-No. 581863000

Closing holes in the concrete.

One package contains 100 pieces.

Expendable form-tie component for single-sided tying.

Art.-No. 116

Art.-No. 045101

Art.-No. 045098

One package contains 20 pieces.

Art.-No. 508302100

Dimensionally stable solid-web beam with fibreboard web and bevelled beam-ends (complies with EN 13377).

Art.-No. 162

Art.-No. 185239000

Plywood sheet made of Chinese poplar veneer with composed deck Veneers. Both sides are coated with 120 g/m² brown phenolic-resin film. Bonding is exterior and will pass a 24 h boiling test.

Weld-on socket for force-transmitting connection between tie rods.

Art.-No. 204

Prevents concrete from escaping at the form-tie point.

Art.-No. 212

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Art.-No. 213

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 229

Connecting Scaffold tubes 48.3mm at any angle to the vertical tubes of load-bearing tower frames.

Art.-No. 341

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Art.-No. 486