Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Mindestabnahme: 2350 lfm
Längen können gemischt werden. Die Mengenrabatte werden nachträglich gutgeschrieben.

Art.-No. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-No. 004

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-No. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 022

Doka-Deckenstützen Eurex top sind Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065.
Sie dienen als vertikale Stützen für temporäre Konstruktionen.

Art.-No. 025

Doka-Deckenstützen Eurex eco sind wirtschaftliche Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen und zeichnen sich durch die konstant hohe Tragkraft von 20 kN bei jeder Auszuglänge aus.

Art.-No. 026

Floor prop for heavy slab loads.

Art.-No. 028

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 032

Self-cleaning threadbar

Art.-No. 033

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-No. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 037

Forming right-angled inside corners.

Art.-No. 038

Forming right-angled inside corners.

Art.-No. 039

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 041

Steel tube with wall thickness of 3.2 mm.

Art.-No. 042

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Closure between the panels.

Art.-No. 044

Closure between the panels for formwork-sheet thickness 21 mm.

Art.-No. 045

Tapered form tie, operated from one side only, for Framed formwork Framax Xlife plus.

Art.-No. 046