Item no. 586169000

Used to prevent re-shoring props from falling.

A package consists of 1 pieces.

Item no. 586732000

Secures slab-edge beams against tip-over.

A package consists of 1 pieces.

Item no. 586730000

Enables a squared timber 4'-0"x4'-0" to be secured and is used for carrying at the LVL joist. Use in the filler zone of a structural column.

A package consists of 1 pieces.

Item no. 586728000

Part of the slab-edge beam and used to for securing against falls during formwork setup of the slab-edge beam.

A package consists of 1 pieces.

Item no. 586727000

Part of the slab-edge beam and used for position-locked and anti-liftout locked carrying in the stringer.

A package consists of 1 pieces.

Item no. 586722000

Used as head extension and to maintain the early-stripping function of the drop head at the building edge when LVL slab-edge beams are used.

A package consists of 1 pieces.

Item no. 586717000

Node of the formwork system and can carry stringers and joists. Is secured to the floor prop and enables early stripping of the formwork.

A package consists of 1 pieces.

Item no. 586711000

Part of the stringer and used for carrying at the drop head and in the stringer.

A package consists of 1 pieces.

Item no. 586720000

Used to secure the drop head to Doka Super props.

A package consists of 1 pieces.

Item no. 586719000

Used to secure the drop head to Eurex props.

A package consists of 1 pieces.

Item no. 586716000

Enables a squared timber 4'-0"x4'-0" to be secured and is used for carrying at the drop head. Use primarily in the filler zone.

A package consists of 1 pieces.

Item no. 586733000

Tool for pulling nails during formwork stripping.

A package consists of 1 pieces.

Item no. 586731000

Assembling tool for stringers, joists and slab-edge beams.

A package consists of 1 pieces.

Item no. 586735000

Used to secure the stringer against liftout from the drop head. Use primarily at the building edge.

A package consists of 1 pieces.

Item no. 586758000

Connection brace for floor props spaced at 6' (1.83 m) centers, to stabilize the formwork system during erection work. An alternative to bracing frames with bracing clamps.

A package consists of 1 pieces.

Item no. 586757000

Connection brace for floor props spaced at 8' (2.44 m) centers, to stabilize the formwork system during erection work. An alternative to bracing frames with bracing clamps.

A package consists of 1 pieces.

Item no. 586759000

To prevent slippage of the beam in the beam fork.

A package consists of 1 pieces.

Plugable diagonal braces made out of steel profiles.

Item no. 191

A package consists of 1 pieces.

Basic frame for shoring towers made out of welded tubes.

Item no. 193

A package consists of 1 pieces.

Lightweight aluminum floor prop with high load-bearing capacity.

Item no. 215

A package consists of 1 pieces.