Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-nr. 002

Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-nr. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-nr. 004

Timber formwork beam H20 eco P is a sold-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-nr. 005

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Art.-nr. 006

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Art.-nr. 007

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites.

Art.-nr. 009

High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 016

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 017

DokaPly eco ist eine nachhaltige europ. Pappelsperrholzplatte als leichte Alternative für den speziell für Einsätze in vertikaler Betonschalung.

Art.-nr. 023

Die extra langlebige Deckenstütze mit Schlag-Protektor

Die robuste und langlebige Deckenstütze Eurex 20 top überzeugt mit einer hohen Mindesttragkraft von 20 kN und entspricht den Stützenklassen D, B/D oder C/D nach Norm EN 1065. Der integrierte Schlagprotektor schützt das Ständerrohr verlässlich vor mechanischen Beschädigungen und erhöht die Lebensdauer der Stahlrohrstütze signifikant.

Art.-nr. 024

Die Deckenstütze mit hoher Tragfähigkeit und sicherer Handhabung

Die geprüfte Qualitätsstütze Eurex 20 eco von Doka zeichnet sich durch eine hohe Mindesttragkraft von 20 kN aus und entspricht der Stützenklasse B/D nach Norm EN 1065. Außerdem überzeugt die Stahl-Baustütze mit ihrer einfachen und sicheren Handhabung, sowie mit ihrem überzeugenden Preis-Leistungs-Verhältnis.

Art.-nr. 026

Self-cleaning threadbar

Art.-nr. 030

Expendable form-tie distance tube for retrievable form ties at waterproof form-tie points.

Art.-nr. 031

Self-cleaning threadbar

Art.-nr. 033

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-nr. 036

Forming right-angled outside corners, stop-ends and column formwork.

Art.-nr. 037

Forming right-angled inside corners.

Art.-nr. 038

Forming right-angled outside corners.

Art.-nr. 040