Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Art.-No. 003

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

DokaPly eco is a sustainable European poplar plywood sheet as a lightweight alternative specially for use in vertical formwork for concrete.

Art.-No. 023

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Art.-No. 026

Telescopic steel prop.

Art.-No. 027

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Framed panel with Xlife sheet for craneless forming.

Aufgrund erhöhter Nachfrage kann es  derzeit zu verlängerten Lieferzeiten kommen.

Art.-No. 056

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 057

Forming right-angled inside corners.

Art.-No. 058

Forming right-angled outside corners.

Art.-No. 059

Forming acute-angle and obtuse-angle outside corners.

Art.-No. 060

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Art.-No. 583012000

Storage and transport device for small items

Art.-No. 580470000

Erecting safety railings at exposed outer edges.