Extension of the Xsafe plus platform waling 1.50m with vertically stacked Framax panels set longside horizontal.

Št. art. 073

Št. art. 580441000

Bracket for making a folding platform.

Št. art. 580485000

Closure between 2 folding platforms and corner solution.

Št. art. 580424000

Pre-assembled scaffold platform for use as working or protection platform at an outside corner.

Steel tube with wall thickness of 3.2 mm.

Št. art. 042

Grating for safety barriers on the formwork or on the structure.

Št. art. 043

Telescopic beam for making shaft platforms.

Št. art. 110

For making a formwork-side railing on the Xsafe plus platform.

Št. art. 113

Št. art. 580470000

Erecting safety railings at exposed outer edges.

Št. art. 581120000

Lost form-tie component for single-sided formwork tying.

Št. art. 581448000

Tightening and loosening cone screws.

Št. art. 581692000

Securing cantilever positioning cones when it is not possible to drill through the formwork sheeting.

Št. art. 581890000

Expendable form-tie component for single-sided tying.

Št. art. 581891000

Closing the opening left in the concrete by the bridge edge beam support.

Št. art. 581896000

Expendable form-tie component for single-sided tying.

Št. art. 581966000

Connector with captive support plate used with tie rods.

Št. art. 581984000

Expendable form-tie component for single-sided tying.

Št. art. 584384000

Fall protection on the structure.

Št. art. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Št. art. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.