Der widerstandsfähige Schalungsträger in Vollwandkonstruktion

Hochwertig, robust, langlebig – Der Doka-Träger H20 top P ist ein widerstandsfähiger Vollwandträger mit einem Steg aus Spezial-Flachpressplatte, der in Wand- und Deckenschalungssystemen eingesetzt werden kann. Die innovative Endverstärkung aus Polyurethan reduziert Beschädigungen und garantiert eine bis zu dreifach längere Lebensdauer.

Art.-No. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Art.-No. 004

Preizkušen opažni nosilec s polno stojino stabilne oblike.

Visokokakovosten, vzdržljiv in izjemno trpežen nosilec H20 eco P je dimenzijsko stabilen nosilec s stisnjeno prešano ploščo in ojačitvijo z odrezanimi zaključnimi robovi in plastičnimi vložki.
Nosilec je primeren za uporabo v stenskih in stropnih opažnih sistemih.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Art.-No. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-No. 025

Teleskopski kovinski podpornik z visoko nosilnostjo za varno uporabo.

Visokokakovostni teleskopski podpornik Eurex 20 eco odlikuje visoka minimalna nosilnost 20 kN. Ustreza razredu podpornikov B/D v skladu s standardom EN 1065. Jeklen podpornik navdušuje tudi z enostavnim in varnim rokovanjem ter odličnim razmerjem med ceno in zmogljivostjo.

Art.-No. 026

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Grating for safety barriers on the formwork or on the structure.

Art.-No. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 075

Bracing load-bearing tower frames.

Art.-No. 076

Infilling along edges and around columns.

Art.-No. 079

For forming large floor areas.

Art.-No. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Art.-No. 083

Post for safety barriers on the formwork or on the structure.

Art.-No. 089

Making assembly platforms with integral manhole.

Art.-No. 091