Timber-and-plastic composite formwork beam with Top beam-end reinforcement and plastic sheet on the broadside of the flange. (Approval n° Z-9.1-773)

N.º art. 001

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

N.º art. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

N.º art. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

N.º art. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

N.º art. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

N.º art. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

N.º art. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

N.º art. 022

EN 1065-compliant telescopic construction prop, made of steel.

N.º art. 024

L'étai de dalle extra-longue avec protection antihoc les chocs intégrée

L'étai de dalle robuste et durable Eurex 30 top convainc par une force portante minimale élevée de 30 kN et correspond aux classe d'étais C/E selon la norme EN 1065. Le protection antihoc les chocs intégrée protège de manière fiable le tube de l'étai contre les dommages mécaniques et augmente de manière significative la durée de vie de l'étai en tube d'acier.

N.º art. 025

EN 1065-compliant telescopic construction prop, made of steel.

N.º art. 026

Floor prop for heavy slab loads.

N.º art. 028

Self-cleaning threadbar

N.º art. 029

Self-cleaning threadbar

N.º art. 032

Self-cleaning threadbar

N.º art. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

N.º art. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

N.º art. 036

Forming right-angled outside corners, stop-ends and column formwork.

N.º art. 037

Forming right-angled inside corners.

N.º art. 038

Forming right-angled inside corners.

N.º art. 039