The Composite formwork beam I tec 20 is a solid-web beam pursuant to DIBT (German Institute of Building Technology) building-industry approval with a special structure and innovative polyurethane end reinforcement for low material quantities and extended service life.

Č. tovar. pol. 001

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Č. tovar. pol. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Č. tovar. pol. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Č. tovar. pol. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Č. tovar. pol. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Č. tovar. pol. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Č. tovar. pol. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Č. tovar. pol. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Č. tovar. pol. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Č. tovar. pol. 025

Doka stropná podpera Eurex 20 eco je vysúvateľná, teleskopická oceľová podpera, ktorá spĺňa požiadavky normy EN 1065. Je navrhnutá pre použitie v Doka stropných systémoch a slúži ako vertikálna podpera pre dočasné konštrukcie. 

Č. tovar. pol. 026

Floor prop for heavy slab loads.

Č. tovar. pol. 028

Self-cleaning threadbar

Č. tovar. pol. 029

Self-cleaning threadbar

Č. tovar. pol. 030

Self-cleaning threadbar

Č. tovar. pol. 032

Self-cleaning threadbar

Č. tovar. pol. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Č. tovar. pol. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Č. tovar. pol. 036

Forming right-angled outside corners, stop-ends and column formwork.

Č. tovar. pol. 037

Forming right-angled inside corners.

Č. tovar. pol. 038