Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Note: For fast shipping, currently only available in the sizes 2,9m 3,9m and 4,9m

Art.-No. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Note: For fast shipping, currently only available in the sizes 2,9m 3,9m 4,9m and 5,9m

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Note: For fast shipping, currently only available in the sizes 200/50cm 250/50cm and 100/50cm

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Note: For fast shipping, currently only available in the sizes 200/50cm 250/50cm and 197/50cm

Art.-No. 009

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

Plywood sheet made of European poplar with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 023

Art.-No. 026

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 041

Infilling along edges and around columns.

Art.-No. 079

Art.-No. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 586179000

Securing intermediate props to prevent toppling.

Art.-No. 588143000

Forming stop-ends.

Art.-No. 588149000

Load suspension device for raising, repositioning and laying down Framax panels and gang-forms.

Art.-No. 588151000

Bracing right-angled inside corners.

Art.-No. 588152000

Securing universal walings to the formwork.

Art.-No. 588153400

Connector for high-tensile connections between framed panels.

Art.-No. 588168000

Infill connection to resist tensile forces.

Art.-No. 588169000

High-tensile, rigid, inter-panel, panel-to-infill, and vertical-stacking joins.

Art.-No. 588433000

Connector for high-tensile connections between panels.

Art.-No. 588436000

High-tensile, rigid, inter-panel and panel-to-infill joins.