Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Réf. 003

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Réf. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 007

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Réf. 022

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 026

Self-cleaning threadbar

Réf. 029

Self-cleaning threadbar

Réf. 030

Bracing gangforms, infills and corners and forming stop-ends.

Réf. 075

Post for safety barriers on the formwork or on the structure.

Réf. 089

Réf. 189930000

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Réf. 189931000

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Réf. 189936000

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Réf. 189937000

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Réf. 581961000

Connector in use with anchor plates and tie rods.

Réf. 581964000

Connector in use with anchor plates and tie rods.

Réf. 581966000

Connector with captive support plate used with tie rods.

Réf. 586148000

Supporting side formwork of drop beams and slab stop-ends.

Réf. 586149000

In combination with Beam forming support 20, adapting to the height of drop beams and slab stop-ends.

Réf. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.