Storage and transport device for Dokadek panels.

Art.-No. 223

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 229

For supporting and aligning wall formwork.

Art.-No. 239

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 260

Panel connection in the outside corner and with column formwork and for attaching universal walings, for example, and other parts to the formwork.

Art.-No. 261

For closures with formwork sheets 27mm.

Art.-No. 277

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 278

Aid for securing and back-staying floor formwork.

Art.-No. 351

Release agent specially for absorbent formwork surfaces.

Art.-No. 521

Art.-No. 535

Art.-No. 576

Art.-No. 581

Art.-No. 587

Art.-No. 588

Forming acute-angle and obtuse-angle inside corners.

Art.-No. 619

Art.-No. 580912000

Release agent specially for absorbent formwork surfaces.

Art.-No. 580913000

Release agent specially for absorbent formwork surfaces.

Art.-No. 185311000

Plywood sheet made of a combination of Vietnamese hardwoods (Acacia & Eucalyptus A/A Grade) with film coating on both sides. Both sides are coated with 120 g/m² Dark Brown phenolic-resin film. Bonding as per EN 314-2 is suitable for exterior use.

• New

Art.-No. 185319000

Eucalyptus veneer plywood panel with film coating on both sides for horizontal and vertical formwork applications.

Art.-No. 735000006

Wedges for the quick accembly of triple-layered wooden formwork.