N.º art. 589284000

Adapter for Framax Xlife plus ratchet 3/4" SW24 for removing the Framax Xlife plus fair-faced concr. cone 87mm from the concrete.

N.º art. 589308000

For watertight and fire-resistant closure of the form-tie points in the concrete.

N.º art. 589216500

Mounts on the holding formwork and, in combination with the Framax Xlife plus form tie, enables the form-tie point to be operated from one side.

N.º art. 176030000

Securing site-provided wooden parts to the formwork.

N.º art. 580031000

For making standard corner panels with Doka beams H20 and Doka formwork sheets.

N.º art. 580035000

Plate for making inside corners with integrated closure function.

N.º art. 580074000

High-tensile and aligning inter-panel connection. Inter-panel joins can be pulled tight.

N.º art. 580078000

Connecting plate for making inside corners.

N.º art. 580080000

Drilling template for panel assembly with beam screws between Doka beams and walings. Used together with the Guide rail .....m.

N.º art. 580081000

For securing Doka formwork beams to closure plates.

N.º art. 580082000

Formwork-sheet stop for panel assembly of the timber-beam formwork.

N.º art. 580110000

For securing the Doka beams at the ends of the waling.

N.º art. 580114000

For securing Doka beams anywhere on the waling. Also suitable for post-assembly securing.

N.º art. 580120000

For securing Doka beams anywhere on the waling or steel profile, for example the I-beam.

N.º art. 580135000

For securing Doka beams H20 anywhere on the multi-purpose waling.

N.º art. 580137000

For securing Doka beams or squared timbers anywhere on the waling or steel profile, for example the IPB. Also suitable for post-assembly securing.

N.º art. 580217000

Hose connection of the Large-area formwork Top 50 or Wall formwork FF20 for self-compacting concrete (SCC).

N.º art. 580218000

For vertical plumbing of beam formwork panels set longside vertical.

N.º art. 580262000

Inside corner plate, for example for shaft formwork. Enables the entire shaft inside corner to be struck and repositioned in one piece.

N.º art. 580267000

For making rigid corner plates at any angle. After the formwork has been plumbed, two Half splice plates are welded at the predefined angle.