Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Art.-No. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-No. 009

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 026

Telescopic steel prop.

Art.-No. 027

Self-cleaning threadbar

Art.-No. 029

Self-cleaning threadbar

Art.-No. 030

Expendable form-tie component for single-sided tying.

Art.-No. 116

Telescopic steel prop.

Art.-No. 161

Dimensionally stable solid-web beam with fibreboard web and bevelled beam-ends (complies with EN 13377).

Art.-No. 162

Turning and holding tie rods.

Art.-No. 202

Weld-on socket for force-transmitting connection between tie rods.

Art.-No. 204

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 260

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Art.-No. 278

Plywood sheet made of unsanded chinese poplar veneers. Both sides are coated with 160 g/m² Black phenolic-resin film. Bonding will pass a 24 h boiling test.

Art.-No. 485

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Art.-No. 486

Release agent specially for smooth formwork surfaces.

Art.-No. 496

Release agent specially for absorbent formwork surfaces.

Art.-No. 521