Art.-No. 301792500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 338180023

The wall tie bracket - double, allows a to create a wall tie using a standard tube. The tube connects to the two standards on the bracket. The hole on the bracket allows a bolt to be installed in order to secure the scaffold to the supporting structure.

Art.-No. 352512000

The Eye-bolt GS is used to secure the Wall tie bracket to the supporting structure.

Art.-No. 352610000

Art.-No. 352523000

The Eye-bolt GS is used to secure the Wall tie bracket to the supporting structure.

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Art.-No. 455

The Aluminium lattice girder beam is a horizontal member of Ringlock scaffolding. It is used for reinforce and bridging over large spans of 3.05m to 8.52m with a lighter component than the Lattice Girders. The Alum lattice girders have 0.5m in depth.

Art.-No. 456

The Aluminum ladder is designed to attach to Ringlock scaffolding using the Ladder Hook Clamp/Clip. The Ladder feet and rungs are offset to allow for safe footing during access and egress. It is available in 4 different sizes: 2.4m, 3.6m, 4.8m and 6.0 m.

Art.-No. 457

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overalp on circular scaffolds and perform the angular connection. They are fized with a plastic plug that is provided with them. They are available in two widths: 0.32m and 0.19m and un 3 different lengths: 1.00m, 1.50m and 2.00m.

Art.-No. 468

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Infill planks with 19cm are designed to fill any unwanted gaps between planks or bays providing a continuous working platform. They are available in the sizes of the most common bays: 0.65m, 0,88m, 1.065m, 1.57m, 2.13m, 2.43m, 3.05m.

Art.-No. 556

Steel plans are used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 557

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-No. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 572

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 573

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 574

The Gap Filler Plates are designed to fill any unwanted gaps between planks or bays creating continuous platforms and can easily be installed in the same method as the infill planks and can be secured to the main planks.

Art.-No. 690

Art.-No. 301030455