Cod. art. 581995000

Prevents concrete from penetrating inside the jacket tube.

Dimensione confezione: 500 pz.

Cod. art. 582528000

Connection resistant to tensile and compressive forces to secure profiles telescoped into each other.

Cod. art. 581839000

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Cod. art. 588674000

Accessory for cleaning formwork sheets.

Cod. art. 586294000

Set-up aid for floor props.

Cod. art. 581860000

Is pushed onto the Plastic tube 22.

Dimensione confezione: 200 pz.

Cod. art. 506501160

Stacking protector on the underside of Dokadek panels

For protecting the formwork sheeting and the frame profiles when panels are stacked. 8 are needed for each Dokadek panel 1.22x2.44m or 0.81x2.44m and 4 are needed for each Dokadek panel 1.22x1.22m or 0.81x2.44m.

Expendable form-tie component for single-sided tying.

Cod. art. 116

Cod. art. 020441

Cod. art. 508302100

Cod. art. 581862000

Sealing form-tie points to meet fair-faced concrete requirements.

Cod. art. 582958000

Extension of the Supporting construction frame AL 3.00m for a pouring height up to 3.30m.

Cost-effective and lightweight, the Doka beam H20 basic P is a solid-web beam with its low weight and proven end reinforcement in the form of bevelled beam ends. (EN 13377-compliant).

Cod. art. 162

Diagonal anchor for anchoring the Supporting construction frame "Variable".

Cod. art. 199

Prevents concrete from escaping at the form-tie point.

Cod. art. 212

Seals the formwork on the concrete side and prevents the concrete from bleeding.

Cod. art. 213

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic resin varnish.

Cod. art. 228

Plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Cod. art. 229

Closing holes in the concrete.

Cod. art. 241

Triangular ledge with soft plastic lips for close fit to the surface of the panel. Used for making no-nails outside corners and column formwork with universal panels.

Cod. art. 278