Connecting plate for high-tensile connections between timber-beam formwork panels at closures.

Art.-nr. 469

Release agent specially for smooth formwork surfaces.

Art.-nr. 496

Framed element made of aluminium with Xlife sheet for craneless forming of right-angle outside corners, stop-ends and column formwork.

Art.-nr. 512

Release agent specially for absorbent formwork surfaces.

Art.-nr. 521

Corner element made of aluminium with Xlife sheet for craneless forming of right-angle inside corners.

Art.-nr. 524

Art.-nr. 535

Art.-nr. 537

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-nr. 549

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-nr. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-nr. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-nr. 574

Art.-nr. 581

Art.-nr. 583

Art.-nr. 587

Art.-nr. 588

Forming acute-angle and obtuse-angle inside corners.

Art.-nr. 619

The Doka Floor prop Eurex 20 basic impresses with a weight advantage of up to 4 kg compared to conventional floor props of class B/D according to EN 1065, and at a constant minimum load capacity of 20 kN for any extension length. The special thread geometry also allows the adjusting nut to be released smoothly even under high load.

Art.-nr. 682

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.-nr. 718

Grating for safety barriers on the structure.

Art.-nr. 819

Art.-nr. 824