Art.-No. 338191500

Das Wandankerrohr ist so konzipiert, dass er an einem Gerüstrohr befestigt werden kann und an eine tragende Struktur anschließt. Es ist in 1,00 m und 1,50 m erhältlich.

Art.-No. 338191000

Das Wandankerrohr ist so konzipiert, dass er an einem Gerüstrohr befestigt werden kann und an eine tragende Struktur anschließt. Es ist in 1,00 m und 1,50 m erhältlich.

Art.-No. 328460600

Die Kopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Dies gilt insbesondere für Anwendungen, bei denen Träger abgestützt werden müssen. Alternativ kann die Kopfspindel auch an der Basis des Gerüsts verwendet werden, indem sie umgedreht wird.

Art.-No. 328450600

Die Vierwegkopfspindel ist für den Einbau an der Oberseite eines Gerüstes vorgesehen. Insbesondere für den Einsatz im Traggerüst, wo ein oder mehrere Träger abgestützt werden müssen.

Art.-No. 319022575

Der Alu-Durchstieg 257 cm dient als leichter, extra breiter Gerüstdurchstieg mit integrierter Leiter. Es ist nur mit 2,57m erhältlich.

Art.-No. 318072075

Access decks are used to create a passage in a working platform. They are placed directly onto the ledgers and are secured with the integrated lift-out guard. The integrated ladder enables the access to the next level. The ladder needs a support at the bottom (decks). Available in 2.07m, 2.57m and 3.07m.

Art.-No. 316053075

The inner guardrail extended is used to shield the inner side of a staircase tower at the exit providing a guardrail at landing bay. Available for stair lengths of 2.57m and 3.07m.

Art.-No. 316052575

Das Innengeländer verlängert wird zur Sicherung der Innenseite eines Treppenturms am Ausgang verwendet und bietet ein Geländer am Ausstiegsbereich. Erhältlich für Treppenlängen von 2,57 m und 3,07 m.

Art.-No. 316013075

The stairs are used to provide access to the various deck levels within the scaffold. The aluminum platform stairs are suitable for 2.00 kN/m² (EN12811: class 3). Alu-stairways are available in lengths of 2.57m, 3.07m.

Art.-No. 315082075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Art.-No. 315072075

The Stair stringer is the diagonal member of the 10 Leg Stair System. The Stringer must be used in pairs in order of supporting the stair treads. The Stringer is used for a typical 2.0m lift height.

Art.-No. 315020890

The Stair tread is designed as the horizontal member connecting to the Stair stringers, providing the steps of the stair system. This fits into a 1.036m (1.04m) Bay width.

Art.-No. 306030780

The Swivel base jack is used as a starting base for a scaffold. It is adjustable in height and angle to allow for compensation on uneven surfaces so that a level scaffold is always attainable.

Art.-No. 306010600

The base jack is used to adjust the height of the scaffold. For base jack 60cm height adjustability is 40 – 450 mm.

Art.-No. 301794000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 301793000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 301792500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 301792000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 301791500

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 301791000

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds