Art.-No. 720075811

Simple measure - great effect.

The Safeflex sliding mesh is the innovative addition for greater safety when shuttering with girder slab formwork in in-situ concrete construction. It impresses with its simple handling, little additional effort and significantly increased safety when laying the formwork panels.

Tested in accordance with DGUV Test GS-Bau-18

Art.-No. 185303500

The acacia plywood panel for simple concrete and fitting surfaces

UNIplex basic is a acacia plywood sheet with a 125 g/m² phenolic resin film coating on both sides for the simplest requirements.

Package size: 43 pcs.

Art.-No. 899900008

The affordable plywood sheet for cut-outs and offcuts

CUTplex basic pine is a veneered, film-coated plywood panel made of poplar (core layer) and pine (cover layers) with a 160 g/m² phenolic resin film coating on both sides for subordinate applications and offcuts - e.g. for use as construction plywood for various on-site applications.

Package size: 45 pcs.

Vertical stacking of a Supporting construction frame "Universal" with Attachable frame F 1.50m for formwork heights from 6.00 m to 8.00 m.

Art.-No. 458

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 037

Forming right-angled shaft inside corners.

Art.-No. 051

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 584

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-No. 036

Bracing gangforms, infills and corners and forming stop-ends.

Art.-No. 041

The plywood sheet for concrete surfaces without special requirements

EUCAplex plus is a eucalyptus veneer plywood sheet with 240 g/m² film coating on both sides, for horizontal and vertical formwork applications.

Art.-No. 533

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 581

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 057

For supporting and aligning wall formwork.

Art.-No. 239

Self-cleaning threadbar

Art.-No. 029

Tool attachment for the 1/2" reversible ratchet for tightening and loosening bolts or nuts.

Art.-No. 326

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 20 top floor prop impresses with a high minimum load capacity of 20 kN and complies with prop classes D, B/D or C/D in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 024

The extra long-lived floor prop with impact protector

The robust and long-lived Eurex 30 top floor prop impresses with a high minimum load capacity of 30 kN and complies with prop classes C/E in accordance with standard EN 1065. The integrated impact protector reliably protects the outer tube from mechanical damage and significantly increases the life span of the tubular steel prop.

Art.-No. 025

The robust birch plywood sheet for smooth exposed concrete surfaces

DokaPly Birch DC 21mm is a birchwood-veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 022

The universal birch plywood sheet for smooth concrete surfaces

DokaPly Birch SC 21mm is a birchwood-veneer plywood sheet with 120 g/m² film coating on both sides, for horizontal and vertical formwork applications subject to ultra-high requirements for the concrete surfaces.

Art.-No. 229

Corner element for forming right-angle outside corners.

Art.-No. 607