The Composite formwork beam I tec 20 is a solid-web beam pursuant to DIBT (German Institute of Building Technology) building-industry approval with a special structure and innovative polyurethane end reinforcement for low material quantities and extended service life.

Réf. 001

Dimensionally stable solid-web beam with three-ply web and PUR beam-end reinforcement. (EN 13377-compliant)

Réf. 002

Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Réf. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Réf. 004

Dimensionally stable solid-web beam with fibreboard web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet.

Réf. 005

Hochwertige dreischichtige Schallungsplatte mit beidseitiger Harnstoff-Melaminharz-Beschichtung 130 g/m².

Dank seiner hochwertigen Verarbeitung und der veredelten Oberflächenbehandlung stellt die 3-SO Schalungsplatte eine optimale Lösung sowohl für konventionelle Schalungsanwendungen als auch für anspruchsvolle Sichtbetonanforderungen dar.

Réf. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 008

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Réf. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Réf. 022

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 024

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 025

EN 1065-compliant telescopic construction prop, made of steel.

Réf. 026

Floor prop for heavy slab loads.

Réf. 028

Self-cleaning threadbar

Réf. 029

Self-cleaning threadbar

Réf. 030

Self-cleaning threadbar

Réf. 032

Self-cleaning threadbar

Réf. 033

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Réf. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Réf. 036

Forming right-angled outside corners, stop-ends and column formwork.

Réf. 037