Timber formwork beam H20 top is a solid-web beam in accordance with EN 13377 with innovative polyurethane end reinforcement for increased resistance to mechanical stresses and strains.

Art.-nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-nr. 004

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Art.-nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 007

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites.

Art.-nr. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-nr. 022

Doka-Deckenstützen Eurex top sind Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065.
Sie dienen als vertikale Stützen für temporäre Konstruktionen.

Art.-nr. 025

Doka-Deckenstützen Eurex eco sind wirtschaftliche Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen und zeichnen sich durch die konstant hohe Tragkraft von 20 kN bei jeder Auszuglänge aus.

Art.-nr. 026

Self-cleaning threadbar

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 030

Grating for safety barriers on the formwork or on the structure.

Art.-nr. 043

Bracing gangforms, infills and corners and forming stop-ends.

Art.-nr. 075

Bracing load-bearing tower frames.

Art.-nr. 076

Infilling along edges and around columns.

Art.-nr. 079

For forming large floor areas.

Art.-nr. 082

Grille made up of primary and secondary beams with swivel heads, for sheeting with any formwork sheeting.

Art.-nr. 083

Post for safety barriers on the formwork or on the structure.

Art.-nr. 089

Making assembly platforms with integral manhole.

Art.-nr. 091

Basic frame with integral ladder and captive connectors for vertical stacking.

Art.-nr. 105

Making end safety barriers.

Art.-nr. 108