Dimensionally stable solid-web beam with fibreboard web and PUR beam-end reinforcement. (EN 13377-compliant)

Mindestabnahme: 2350 lfm
Längen können gemischt werden. Die Mengenrabatte werden nachträglich gutgeschrieben.

Art.-nr. 003

Dimensionally stable solid-web beam with three-ply web and end reinforcement in the form of bevelled beam-ends and extra plastic rivet. (EN 13377-compliant)

Art.-nr. 004

Der Holzschalungsträger H20 eco P ist ein Vollwandträger gemäß EN 13377 mit bewährter Endverstärkung durch Abschrägung der Trägerenden und zusätzlichem Kunststoffniet im Trägergurt.

Art.-nr. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 006

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 007

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 008

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Art.-nr. 009

3-ply infill sheet made of spruce, crosswise glued, without edge strip. Surface enhanced with urea-melamine resin adhesive.

Art.-nr. 011

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-nr. 017

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Art.-nr. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-nr. 022

The Doka Floor prop Eurex 20 top has an integrated impact protector for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 20 kN at any extension length and corresponds to prop class D, B/D or C/D according to EN 1065.

Art.-nr. 024

The Doka Floor prop Eurex 30 top has an integrated impact protector (except for length 550) for reliable protection against mechanical damage. This long-lasting steel tube floor prop guarantees a minimum load capacity of 30 kN at any extension length and corresponds to prop class C/E according to EN 1065.

Art.-nr. 025

Doka-Deckenstützen Eurex 20 eco sind Baustützen aus Stahl mit Ausziehvorrichtung, entsprechend EN 1065. Sie dienen als vertikale Stützen für temporäre Konstruktionen. Sie sind für den Einsatz in Doka-Deckensystemen konzipiert. 

Art.-nr. 026

Self-cleaning threadbar

Art.-nr. 029

Self-cleaning threadbar

Art.-nr. 032

Self-cleaning threadbar

Art.-nr. 033

Expendable form-tie distance tube for retrievable form ties in fair-faced concrete.

Art.-nr. 034

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-nr. 035

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-nr. 036