Doka floor props Eurex 20 top are adjustable telescopic steel props that conform to EN 1065.
They are designed for use as vertical props for temporary structures.

Réf. 024

Doka floor props Eurex top are extendable floor props made of steel and are compliant with EN 1065.
They are designed for use as vertical props for temporary structures.

Réf. 025

The floor prop with high load capacity and safe handling

The tested quality prop Eurex 20 eco from Doka is characterised by a high minimum load capacity of 20 kN and corresponds to prop class B/D in accordance with standard EN 1065. The steel props also impress with their simple and safe handling and their impressive price-performance ratio.

Réf. 026

Réf. 586155500

For securing floor props

Réf. 586145000

For securing floor props

Réf. 586174000

Floor-prop head for supporting and stabilising Doka formwork beams, with integral quick-lowering feature.

Réf. 586179000

Securing intermediate props to prevent toppling.

Réf. 586170000

Floor-prop head for supporting and stabilising Doka formwork beams.

The durable formwork beam with a solid-web design

High-quality, robust, long-lasting – The Doka H20 top P beam is a durable formwork beam in solid-web design with a web made of special flat-pressed sheet that can be used in wall and slab formwork systems. The innovative polyurethane beam-end caps reduce damage and guarantee a service life that is up to three times longer.

Réf. 003

Timber formwork beam H20 eco N is a solid-web beam in accordance with EN 13377 with proven end reinforcement in the form of bevelled beam ends and extra plastic rivet in the beam flange.

Please note that delivery bottlenecks may occur due to increased demand and delivery times may be extended as a result.

Réf. 004

The tried-and-tested formwork beam in solid-web design

High-quality, hard-wearing, durable – The Doka beam H20 eco P is a dimensionally stable solid wall beam with a web made of special flat-pressed sheet and proven end-reinforcement by bevelling the beam ends and an extra plastic rivet in the beam chord. The beam can be used in wall and slab formwork systems.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Réf. 005

Three-ply solid-wood sheet made of spruce with 130 g/m² urea-melamine resin coating on both sides. The edges are sealed with an emulsion coating. According to Austrian standard ÖNORM B 3023.

Réf. 007

Réf. 582528000

Connection resistant to tensile and compressive forces to secure profiles telescoped into each other.

The Doka formwork sheet 3-SO is a high-grade three-ply solid-wood sheet with urea-melamine resin coating on both sides for horizontal and vertical formwork applications.

Réf. 006

The Formwork sheet 3S basic is a three-ply solid-wood sheet with urea-melamine resin coating on both sides for many different uses on construction sites.

Réf. 008

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Réf. 022

Réf. 580470000

Erecting safety railings at exposed outer edges.

Réf. 584385000

Pushed into the fresh concrete, push-in socket for the Handrail post 1.10m.

Quantité par paquet : 100 pcs.

Réf. 584386000

Pushed into the fresh concrete, screw-in socket for the Handrail post 1.10m.

Quantité par paquet : 100 pcs.

Réf. 586148000

Supporting side formwork of drop beams and slab stop-ends.