Expendable form-tie component for single-sided tying. Length: 115 mm

Art.-No. 116

Expendable form-tie component for single-sided tying. Length:115 mm

Art.-No. 117

Art.-No. 589470000

Connector for high-tensile connections between framed panels.

Art.-No. 589476000

Connector with captive support plate used with tie rods.

Art.-No. 589478000

Panel connection in the outside corner and with column formwork and for attaching universal walings, for example, and other parts to the formwork.

Art.-No. 589477000

Securing the Framini bracket 60 to column formwork with universal panels.

Art.-No. 589471000

Infill connection to resist tensile forces.

Art.-No. 589472000

Bracket for making a working platform for drop-in engagement on the formwork.

For supporting and aligning wall formwork.

Art.-No. 239

For securing Doka beams anywhere on the waling.

Art.-No. 305

For securing plates and accessory parts, for example to multi-purpose walings.

Art.-No. 344

Art.-No. 185188000

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Art.-No. 480

Plywood sheet made of unsanded chinese poplar veneers. Both sides are coated with 160 g/m² Black phenolic-resin film. Bonding will pass a 24 h boiling test.

Art.-No. 485

Plywood sheet made of Chinese eucalyptus veneers with 130 g/m² phenolic-resin film coating on both sides. The melamine-resin glue-bonding of the panel passes the 24 h boiling test to the Chinese standard. The edges are sealed with acrylic-resin varnish.

Art.-No. 531

Grating for safety barriers on the structure.

Art.-No. 819

Art.-No. 734009101

Art.-No. 734009102

Art.-No. 586183000

Floor-prop head for supporting and stabilising Doka formwork beams.

Art.-No. 185297000

Multi-ply formwork sheet. Doka formwork panels are used as concrete-contacting elements for shaping fresh concrete.